Anti-Fungal coating provides hard coated surface. It gives long lasting protection against algae and fungal growth in damp and humid conditions. This coating was developed for glazing applications such as conservatories and other high visibility areas. Here, copper/polymer nanocomposites are proposed as anti-fungal spinnable coatings with controlled copper-releasing properties.

Anti gel additives are used to keep all types of fuels and diesel oils flowing in cold weather. Anti gel additives interfere with the formulation of wax crystals in the fuel, the pour point of the fuel can be reduced by as much as 25 degrees. Fuel flows freely through lines and filters without the need for tank heaters. The features of these additives include reduction of pour point, gelling inhabitation, fuel stabilization and less moisture.

Anti-glare coating is the optical coating. It is a multi layer coating with bonds into the glass. Anti glare coating is conductive for 99.99% static ELF/VLF dissipation. The coating eliminates the glare. Examples of anti-glare coatings are Ti02-Ag, and Cd-Sn-Ox. A black coating of nickel phosphorous reflects only 0.2 percent of incident light at 630 nm.

Anti-seize lubricant is a paste-like compound that should be applied to screw-threaded connections between steel and aluminum parts to prevent binding. Its main purpose is to prevent fasteners from well seizing. The bolts frequently break off rather than unthreading. Any thing that threads into aluminum presents a special problem, especially spark plugs. If the engine uses aluminum heads, then anti seize lubricant must be used. It is used during assembly to prevent galling, corrosion and seizing & to assure easier disassembly.

Anti-skid coating is applied to the entire top of tank between the runways. It is disclosed a protective coating composition suitable for application to surfaces of concrete, wood or metal to provide each surface with increased skid and chemical resistance.

Anti skid plate is a metal plate with sharp projections on each side. It is used between wood members or containers to retard movement. It is fixed in a corner of a staircase. The corner is formed with a L-shaped notch, which has a horizontal notch portion at an angle of about 90 degree.