(4 suppliers)
(3 suppliers)
(2 suppliers)
(21 suppliers)
(5 suppliers)
(1 supplier)
(2 suppliers)
(3 suppliers)
(2 suppliers)
Power Turn conveyors improve the performance of the unit with very low sound levels, high speed capability, and improved maintainability. The belt on a power turn conveyor is positively driven by a shaft-mounted sprocket engaging a precision sidebow chain. The chain is attached directly to the outside edge of the belt. This positive drive arrangement is unaffected by changes in loading, tension, temperature or humidity. The idea of distributing power in multiple locations on a belt conveyor has been around for a long time. By splitting the power into two locations, the maximum belt tension is reduced by almost 40 percent while the total power requirement remains virtually the same. A much smaller belt can be used and smaller individual power units can be used.
(23 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(43 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
Power Vacuums is used to collect large quantities of materials. It is used in the heavy industry, foundries, steelworks, cement plants, cereal warehouses and incinerators. These machines can be either fixed or mounted on a lorry.They can be provided with dozens of different solutions according to the material and quantity to collect.
(1 supplier)
(1 supplier)
(1 supplier)
(2 suppliers)
(1 supplier)
(2 suppliers)
(1 supplier)
(5 suppliers)
(3 suppliers)
(30 suppliers)
Power Washers are devices that pump water under high pressure through a hose connected to an outside faucet. Power washers are equipped with industrial rated water pump that produces 4000 PSI at 3.5 GPM, which enormously speed up the cleaning process. Pressure washers are used to wash house exteriors, loose paint from exterior siding, vehicles, heavy equipment and barbecue equipment.
(8 suppliers)
(4 suppliers)
(1 supplier)
(1 supplier)
(3 suppliers)
(3 suppliers)
(4 suppliers)
(1 supplier)
(1 supplier)
(3 suppliers)
(2 suppliers)
(1 supplier)
(4 suppliers)
(2 suppliers)
(418 suppliers)
(3 suppliers)
(0 suppliers)
(1 supplier)
(1 supplier)
(4 suppliers)
(1 supplier)
(2 suppliers)
Power-Off Brake provides static holding in absence of power. It is used on the backs of motors to hold machines, pulleys, Z-axes and robotic arms. It has preset air-gap with laser cut shim for field installation. Brakes with side-fit spline hubs maintain clearances to minimize backlash. It provides static engagement with torque from 12.5-470 lb-in. while field assembly is fixed and prevented from rotating. In absence of power, fixed and rotating components are engaged which stops and/or holds load.
(1 supplier)