Propane torch is a tool for burning the flammable gas propane. It achieves the maximum adiabatic flame temperature with air is about 2268 kelvins. It is also used with a tank of pure oxygen to achieve a flame temperature about 3095 kelvins. It is used in solder copper water pipes. It is used for low temperature welding applications as well as for brazing dissimilar metals.

Propellant Injectors are suitable for use in filling of liquefied propellants & can be used as stand alone equipment or as part of a production line. Specifications include speeds up to 45 fills per minute, 0 cc to 500 cc capacity, pneumatic operation via table switch control & stainless steel frame option.

Propeller Agitators use three-bladed marine-type propellers. These units are characterized by rotational speeds that seldom permit the propeller diameter to exceed 1.5m. Propeller agitators are sized by horsepower according to the volume and viscosity of the batch. Propeller agitators have blades that extend over less than 25% of tank diameters and resemble marine propellers. They operate at speeds of 400 rpm to 1,500 rpm. The propeller agitators hydraulically transfer very high impulse forces, through which it is possible to maintain large basin volumes in continuous motion.

Propeller is a device which transmits power by converting it into thrust for propulsion of a vehicle such as an aircraft, ship, or submarine, by rotating two or more twisted blades about a central shaft, in a manner analogous to rotating a screw through a solid. The blades of a propeller act as rotating wings, and produce force through application of both Bernoulli's principle and Newton's third law, generating a difference in pressure between the forward and rear surfaces of the airfoil-shaped blades. Propellers of all types are referred to as screws, those on aircraft are usually referred to as airscrews. Changes to a propeller's efficiency are produced by a number of factors, notably adjustments to the helix angle, the angle between the resultant relative velocity and the blade rotation direction, and to blade pitch. Constant-speed propellers automatically adjust the blade pitch angle to alter resistance torque in response to sensed changes in rotational speed.

The property estimation software is used by field property adjusters to complete estimate reports on site, print them for review by the insured, then transmit the data via a secure internet connection to a back-end claims processing server.