Cylinder Sleeves are removable, cylindrical inserts. They are of two types such as dry sleeve and wet sleeve. The dry sleeve is separated from the water jacket by the cylinder wall. The wet sleeve is in direct contact with the coolant and has thicker walls as no outside structure provides support. Sleeves are typically cast iron. Cylinder sleeves are available for two-stroke and four-stroke applications.

Cylinder Surfacers features surfacer technology in an economical package. These are available in floor or bench models and in two or four-spindle configurations. It requires no side or rear access for maintenance.

Cylinder is a rotating device that contains the firing chambers of a revolver. A cylinder is in the central working part of a reciprocating engine, the space in which a piston travels. Multiple cylinders are commonly arranged side by side in a bank, or engine block, which is typically cast from aluminum or iron before precision features are machined into it. A cylinder's displacement, or swept volume, is its cross-sectional area times the distance the piston travels within the cylinder. The engine displacement is the swept volume of one cylinder times the number of cylinders in the engine.

Air cylinders are driven by pressure differential in the cylinder chambers. One side of a piston flange may be pressurized to provide force and motion with a spring providing return force after pressure is released or both sides can be alternately pressurized for bi-directional powered motion. Air cylinders are used in many positioning, actuating and clamping applications and devices. Choices for cylinder style includes tie rod, smooth body, pancake, rectangular, and multiple bore. Tie rod cylinders are held together by exterior tie rods, they are usually in a rectangular bolt pattern. In a smooth body cylinder style, the cylinder body encases the piston. A pancake cylinder has a shorter length and larger diameter than other styles. A rectangular cylinder is encased in a rectangular box shape frame. In a multiple bore cylinder two or more bores and pistons are combined or stacked in same cylinder. The cylinder can be single or double action. Single action cylinders frequently incorporate a return spring to the un-powered position. In a double action analyzer both sides of piston can be pressurized for reversible motion.

Pulling Cylinders are double acting cylinders, designed for working with heavier pulling forces than ordinary cylinders. Pulling cylinders are used for the lifts that have long travel heights. Pulling cylinders provide a compact layout and light weight support frame design. These pulling cylinders reduce stress and increase the life of seals & cylinders.

Cylindrical 2-pole magnet is a ceramic permanent magnet assembly using the highest quality ferrite magnet material. This material cannot be drilled or tapped. Any alterations must be done by diamond cutting operations. Two pole magnets are used for weld applications.

The cylindrical bending leads to an increase in damping as the aspect ratio is increased. The most rectangular laminated plates having a high length-to-width ratio is analyzed as an infinite strip. The deformation of such a long plate under bending appears as a simple radius of curvature around a cylinder.