Regulator Valves are valves that change the pressure of the fluid. The pressure change occurs as the position of the valve allows some of the fluid to exhaust. These valves are widely used in transmissions to control the line pressure. These are also used to control the signal shift points. This valve has a spring that holds the valve in a position until the fluid pressure is enough to compress the spring. At that time, the valve moves and allows some fluid to exhaust. Once the fluid begins to exhaust, the pressure on the valve decreases. The valve remains in the exhausted position until the fluid pressure is not enough.

Pressure Regulators are used to reduce the pressure to a lower pressure sub-system or to regulate system pressure at the desired value. Its feature includes integral pressure gauge, integral filter, integral lubricator, pressure relief and tamper-proof.

Reheating Furnace consists of furnace body, housing, walking beam part and axial flow burners. The feature includes length 6,000-12,000 mm, width 700-2100 mm and reheating temperature of 1170 to 1250°C. The slabs are reheated in a walking beam furnace with a capacity of 450 t/h for cold charging. This reheating furnace is used for hot rolling line equipped as a heating process after casting.