Impact testers are used to measure the energy absorbed in fracturing a test specimen at high velocities. The energy absorbed, during the impact test, can be used as a measure of material's strength and ductility. One of the most important properties for a part designer to consider is the impact resistance of a material. Generally, impact testers can reach impact velocities up to 20 m/s and impact energies up to 1670 Joules with its spring assist velocity accelerator.

Industrial B-SCAN Inspection System is utilized as a scrap reduction tool as alarms and displays defective wall profiles from a broken or chipped flash cutting tool or weld edge mismatch. These systems are utilized for weld profile monitoring to ensure that the overall weld thickness is within set tolerances. They are suitable for ferrous and non-ferrous product. The feature includes unique dual AGC circuit, auto-calibration and filtering & digital image enhancement.

An insertion tool is used inserting a backup ring and an O-ring into a gland. It includes a body having a recess for containing the backup ring and the O-ring. It also contains a pusher movably mounted adjacent to the body. The pusher is moveable in a first direction and a second direction. The pusher includes a pulling device for pulling the backup ring and the O-ring in the first direction.

The guy wires are inspected from the top to the bottom using a crane man cage, by qualified riggers to identify any faults or damage that has occurred to the wires. This inspection recommends modifications, replacements or improvements, if the guy wire is not in condition.

Laboratory Heat Sealer is designed for development work in determining the sealing properties and characteristics of plastic and laminated materials. The heat sealer is electrically heated and temperature controlled with adjustable sealing pressure, controlled by a timer. Sealing bars are covered with Teflon for non-stick to use easy. Sealing is initiated by two push buttons powering a pneumatic cylinder to lower the upper sealing bar to seal. The timer will determine the length of time that the sealing bars in contact and the sealing pressure is adjustable by a regulator. It is used to precisely control the parameters essential in determining the heat seal threshold. It is especially suited for flexible packaging materials and features accurate control of temperature, pressure and dwell time of a standard surface area sealing jaw.