Oil Absorbent is used for biological degradation of oil-products. It absorbs oils, fuels, petroleum based solvents on land or water. It is used as floor absorbent, particularly for oily materials and in pet litters. Oil absorbents are designed specifically to control, clean and recover oil and other petroleum based fluids. It repels and floats on water while absorbing hydrocarbon based fluids. It is available in booms, sheets, pads, pillows and rolls.

Oil colors are made by mixing an adequate amount of cold-pressed linseed oil with a pigment to make a smooth buttery paint. When the paint is applied to a surface, the oil absorbs oxygen from the air and polymerizes to form a solid film, which binds the pigment to the canvas or panel. The dried film is tough and flexible, resistant to abrasion and water, and is not easily soluble in normal diluents, such as turpentine. The paint can keep well for long periods when stored in containers, such as tubes or jars, that exclude the air. It is desirable to use only as much oil as is absolutely necessary to bind the pigment in a film of good flexibility and adhesiveness. Since all linseed oil yellows to some degree the more oil that is used in the paint, the greater the amount of subsequent yellowing.

The oil-based inhibitors include water-displacing and non-staining rust preventatives that provide humidity and salt spray protection. It is used after machining or alkaline cleaning operations, and some may be used over black oxide, zinc phosphate or bare ferrous alloys. The water displacing and non-staining rust preventative displaces water after machining or alkaline cleaning operations.

Optical brightner is a dyes, which absorb light in the ultraviolet and violet region of the electromagnetic spectrum, and re-emit light in the blue region. These additives are designed to enhance the appearance of colours in fabrics and on papers. They may also enhance or modify the appearance of white items. This creates a whitening effect by making materials look less yellow and by increasing the overall amount of light reflected to the eye. The most common class of chemicals with this property are the stilbenes. These chemicals are commonly part of laundry detergents to replace fluorescent whitening agents removed during washing and enhance the appearance of garments.

Orange cleaner degreaser is a water-based, fresh-scented, biodegradable citrus cleaner that effectively cleans grease, oils, and resins. It contains no hazardous chlorinated/fluorinated solvents or acidic type chemicals. It's unique formula of non-ionic surfactants, emulsifiers, water softeners and biodegradable ingredients cuts through oily & greasy dirt, encapsulating the oil and dirt into a solution that can be easily rinsed away.

Oxalic Acid is the chemical compound formula H2C2O4. It is a strong organic acid. Oxalic acid exhibits many of the reactions characteristic of other carboxylic acids. Oxalic acid solutions are used to lighten and brighten dingy gray wood. This is a highly corrosive and toxic substance. Oxalic acid is widely used as an acid rinse in laundries. Oxalic acid is a poisonous & colorless substance.

Pacemaker Wax is a complete line of fully refined paraffin wax, which is recommended for applications demanding the ultimate in refinement and product uniformity. These waxes are filtered & percolated to be odor free, taste free and water white in color. These are manufactured in different melt point grades offering a wide selection for any paraffin wax requirement. These are available in 2,000 pound palletized carton, liquid bulk tank trucks or liquid bulk tank cars.

Palladium catalyst is the most used among precious metal catalysts for diversified purposes. The palladium catalyst is widely used for synthesis of specialty chemicals because many reactions can take place by the catalyst at a lower temperature and pressure with a minimal quantity and minimal side reaction, especially in the hydrogenation of olefins and aromatic nitro compounds, as compared with sponge Ni metal (Raney type Ni) catalyst. It is also used for a dehalogenation and a carbonylation.

Peppermint oil is used for a variety of health conditions, including nausea, indigestion, and cold symptoms. It is an excellent digestive aid. It eliminates gas, bloating and abdominal cramps. It improves circulation and the production of digestive fluids. All natural peppermint oil relieves headaches, nausea and soothes spastic colon. It is also a great expectorant. Use externally to treat colds, flus and fevers, it cools down the body, and relieve a variety of respiratory conditions.

Petroleum Coke is defined as a black solid residue obtained by cracking and carbonising of petroleum derived feedstocks, vacuum bottoms, tar & pitches in processes such as delayed coking or fluid coking. Petroleum coke is a by-product of the oil refining process. Petroleum coke is a carbonaceous solid derived from oil refinery coker units or other cracking processes. Petroleum coke used in the production of electrodes for the steel and aluminum industries. Petroleum coke is high in sulphur and low in volatile content, which pose some environmental and technical problems with the combustion. Petroleum coke is used as either a primary or a secondary fuel in a new grassroots plant or for co-firing in an existing coal-fired power plant. Petroleum coke is a solid, hard, black residue material that remains after heavy residual oil fractions are cracked to produce lighter hydrocarbons. Petroleum coke is used in the cement, lime, power generation and aluminum industries.

Petroleum jelly is a a semi-solid mixture of hydrocarbons. It is a purified mixture of semi-solid, saturated hydrocarbons, mainly of paraffin nature, obtained from petroleum. It may contain antioxidants approved for food use. It is originally promoted as a topical ointment for its healing properties. Its folkloric medicinal value as a cure-all has since been limited by better scientific understanding of appropriate and inappropriate uses.

A typical PGM catalyst may consist of platinum-rhodium gauze woven from wire. It is produced on a range of supports such as alumina, silica, titania, zirconia, zeolites, carbon coated oxides and mixtures thereof and in a range of different shapes and sizes. It is used to lower these temperatures, and consequently by limitations on which hydrocarbons which can be used to generate the hydrogen.

A phase transfer catalyst is a type of chemical compound. It is a quaternary ammonium salt, which facilitates the migration of a particular chemical component in one phase into another phase in a heterogeneous system. The chemical component is soluble in one phase but insoluble in the other unless the phase transfer catalyst is present. A phase transfer catalysts works by encapsulating the ion. The PTC-ion system has a hydrophilic interior containing the ion and a hydrophobic exterior. Crown ethers are also efficient phase transfer catalysts.

Plaster of pair is a type of building material based on calcium sulfate hemihydrate. It is created by heating gypsum to about 150 °C. A large gypsum deposit at montmartre in paris is the source of the name. When the dry plaster powder is mixed with water, it re-forms into gypsum, plaster is used as a building material similar to mortar or cement. Like those materials plaster starts as a dry powder that is mixed with water to form a paste, which then hardens. Unlike mortar and cement, plaster remains quite soft after drying, and can be easily manipulated with metal tools or even sandpaper. These characteristics make plaster suitable for a finishing, rather than a load-bearing material.