Mildly Alkaline Metal Cleaning Compound with an efficient surfactant system is designed as a non-etch cleaner for aluminum. It is also effective on copper, brass, zinc, and ferrous metals. It is excellent for removing marking inks, drawing compounds, waxes, as well as normal shop oils. It is also a burnishing compound for all metals. It is dilute with water before using, rinses completely and non-toxic, long bath life and low alkalinity.

Mildly Alkaline Tumbling Compound will enhance the cut and debur when added to vibratory or conventional tumbling operations. It has medium aggressive cutting compound that yields good surface finish RMS and also used in batch operation. It has fast deburring cycles, good cleaning capabilities and allows the use of less aggressive preformed tumbling media.

Mineral oil is a by-product in the distillation of petroleum, which is used to produce gasoline. It is a transparent, colorless oil composed mainly of alkanes and cyclic paraffins, related to white petrolatum. It is a substance of relatively low value, and it is produced in very large quantities. Mineral oil is available in light and heavy grades, and can often be found in drug stores.

Mineral spirit is a refined petroleum distillate having a low aromatic hydrocarbon content, with volatility, flash point, and other properties making it suitable as a thinner and solvent. It is also known as petroleum spirits. In industry, mineral spirit is used for cleaning and degreasing machine tools and parts. Odorless Mineral Spirits are mineral spirits that have been further refined to remove the more toxic aromatic compounds, and are recommended for applications such as oil painting, where humans have close contact with the solvent.

NanoActive Aluminum Oxide is produced using proprietary processes to obtain high specific surface area, low density, and amorphous material with high adsorption capacity and chemical reactivity. NanoActive Aluminum Oxide is dispersed in various carrier fluids with greatly reduced particle sizes.

NanoActive Calcium Oxide is produced using proprietary processes to obtain relatively high specific surface area material over 20 m2/g vs. 1-2 m2/g for standard CaO with strong affinity towards carbon dioxide and hydrogen sulfide.

NanoActive Cerium Oxide is produced using proprietary processes to obtain a high specific surface area, aggregated dry powder that is dispersed in various carrier fluids to significantly reduce the particle size.

NanoActive Copper Oxide is produced using proprietary processes to obtain high specific surface area, small crystallite size, pure material with excellent affinity towards hydrogen sulfide.

NanoActive Magnesium Oxide is produced using proprietary processes to obtain high specific surface area, small crystallite size material possessing high chemical reactivity, particularly at elevated temperatures.

NanoActive Titanium Dioxide is produced using proprietary processes to obtain very high specific surface area, high porosity, weakly aggregated, amorphous material possessing extraordinary adsorption capacity and chemical reactivity.

NanoActive Zinc Oxide is produced using propriety processes to obtain high specific surface area, small crystallite size material that are dispersed in various carrier fluids with significantly reduced particle sizes.

Naphthols are also called as hydroxynaphthalene. It is either of two colorless crystalline solids with the formula C10H7OH. These are positional isomers differing by the location of the hydroxyl group on naphthalene. ?-Naphthol is naphthalen-1-ol, and ?-naphthol is naphthalen-2-ol. Naphthol is the naphthalene homologue of phenol, with the hydroxyl group being more reactive than in the phenols. These are soluble in simple alcohols, ethers, and chloroform. They can be used in the production of dyes and further organic synthesis.

Natural gas is a gaseous fossil fuel consisting primarily of methane. It is found in oil fields, natural gas fields and in coal beds. It also contains heavier gaseous hydrocarbons such as ethane, propane and butane. Processed natural gas that is available to end-users is tasteless and odorless. It is lighter than air, and so tends to dissipate into the atmosphere. Quantities of natural gas are measured in normal cubic meters or in standard cubic feet. It is liquefied by reducing its temperature to minus 260 degrees Fahrenhiet.

Near Neutral Burnishing Compound is effective on copper and brass base metals. It is imparting a high luster on copper and copper alloys. It is used in vibratory, conventional barrel or new high speed mass finishing operations and in batch and continuous tumbling processes.

Near Neutral pH Tumbling Compound has excellent burnishing capabilities. It is used in vibratory, conventional barrel, or new high speed mass finishing operations. It is especially effective on copper and brass base metals. The medium foaming compound can be used in either batch or continuous tumbling systems. It also provides steel substrates burnishing capabilities.

Near-Neutral Degreasers are used in spray wash system. It is safe on ferrous and non-ferrous metals, which includes aluminum. It will provide short-term corrosion protection.

Neutral detergents are pH 7 meaning neither acidic nor alkaline. It is used as a floor cleaner for waxed and epoxy floors. It is good for general cleaning of machine shops. The neutral pH, safe, non-ionic spotting detergents are used for all carpet fibers. It is specifically designed to neutralize and flush harsh spotting agents from carpet. It leaves crisp, dry residue for easy vacuum removal.

Nitrobenzene is known as nitrobenzol or oil of mirbane, is a poisonous organic compound with an almond odor. It is used as a solvent and as a mild oxidizing agent. It is most frequently used specifically in the manufacture of aniline and used in the manufacture of insulating compounds & polishes. Nitrobenzene is also used in shoe & floor polishes, leather dressings, paint solvents and other materials to mask unpleasant odors. Nitrobenzene is used as an inexpensive perfume for soaps.

According to the manner in which nitrogen is combined with other elements, the nitrogenous fertilizers are divided into four groups; nitrate, ammonia, ammonium salts and plant & animal by-products. Inorganic nitrogenous fertilizers contain nitrogen in inorganic form. It is further divided into following groups according to the form of nitrogen they contain. Organic nitrogenous fertilizers contain nitrogen in organic form.