Battery powered lifting magnets are popularly useful throughout the plant, around the yard, in receiving and shipping areas, cut-off saws, burning tables and machine tools. They have widespread applications for handling of machined components, die-blocks, smooth castings and forgings, plates, bars, pipes and structural.

Beam Tracks are used to make the upper and lower parts of reverse and compound vertical curve. It provides strength and wear qualities than track made from mild steel. It is used to measure track widths, and determining scattering angles.

Bearing Inserts, commonly known as a wide inner ring bearing, are basically deep groove ball bearings. Insert bearings are designed in almost the same way as deep groove ball bearings, except that the outer ring is spherical.

Pillow block bearing is a mounted bearing which is used to provide support for a rotating shaft with the mounting surface on a parallel line with the axis of the shaft. Pillow block bearings are generally self-lubricating. Pillow block bearings are a form of mounted bearing used to provide load support for a rotating shaft axis. The bearing housing mounts to a surface parallel to the shaft axis. Selection of the appropriate bearings can be accomplished based on the shaft size and the radial and thrust load requirements. It is designed to support a shaft: the mounting surface is on a parallel line with the axis of the shaft. Elongated bolt holes in the base or feet of the unit allow for some adjustment and easy mounting of the pillow block bearing.

Rod End Bearings is mainly used on cylinder ends, linkages, rod and shafts to handle angular misalignment between connected parts. It consists of an spherically shaped inner ring and a cylindrical bore for shaft mounting. These bearings are attached to rods and shafts via a male stud with external threads or a female housing with internal threads. Right-handed threads tighten in a clockwise direction and are the most commonly used type of thread. Rod end bearings differ in terms of dimensional specifications and special features. Dimensional specifications include design units, bore diameter, major diameter, bearing thickness, housing diameter, overall length, and thread length. Rod end bearings are used in applications that accommodate low to moderate shaft misalignment. They are also used in many aerospace, military, and automotive applications.

Beech Counterweighted Cranes provides safe lifting in close quarters. It is perfect in machine shops, injection mold shops. Each crane is proof loaded at 150% to insure integrity and is equipped with a safety valve to prevent dangerous overloading. Hydraulic lift is controlled by a hand pump and precision lowering is regulated by a needle valve. All cranes are shipped complete with extension boom, safety swivel hook, counterweights, steering handle and roller bearing phenolic wheels. Optional wheels, floor lock and power lift option featuring deep cycle battery. Fully automatic charger and remote pendant on 20' coil cord is available.

Bell bottom jack is used for variety of lifting and holding jobs such as construction, rigging, moving buildings and plant maintenance.

Belt conveyor system contains two pulleys with a continuous loop of material. It is efficient to rotate the pulleys. The pulleys are powered, moving the belt and the material on the belt forward. Conveyor belts are extensively used to transport industrial and agricultural materials. These belts are used in self-unloading bulk freighters and in live bottom trucks.

Belt conveyors are suited to carry all sorts of material, wet or dry, from the lightest to the heaviest, and in any quantity. They are comprised of an endless belt that can be of any width and length. The belt is driven on one side with an idler roller on the other side. Sheet metal or metal rollers are used to support the belts. Belt materials can be plain or rubber-coated canvas, wire mesh or stainless steel ribbon. The belts can have the side supported at an angle to form a gutter. Smooth belts can be used for inclines up to about 20?. If the belts are fitted with special slats or other devices to prevent rollback or slipping, they can be used on inclines up 45?.