Belt feeder is composed of a conveyor belt, which is supported by rollers. This feeder type is ideal for close volume control of sand and gravel, and especially for dry and fine materials. The length can vary from 1.5 to 3 m and speed from 0.005 to 0.5 m/s. Power requirements vary from 3 to 30 hp.

Belt misalignment switches are used for protection of belt conveyors and personnel. These switches are used in conveyor installations for monitoring the true running of conveyor belts. These are mounted on the top or bottom of the conveyor stringers with the actuating arm adjusted to the outside edges of the belt. It can be optionally supplied with a pre-alarm position for an alert signal at slight deviation and a final cut-out and lock.

Belt Overdrive System is designed to assist the accurately measure belt overdrive. It maintains proper overdrive to increase belt life.

Conveyor belt rip detector is used to monitor the integrity of a conveyor belt. It has antenna for coupling or not coupling signals as an indication of a belt integrity. It is mounted just outside loading and transfer points on the supporting structure each side of the conveyor belt. It can be fitted to new or existing conveyor systems.

Belt Table is a cooling and storage area prior to stretching, feature high-temperature, speed-adjustable and reversible belts. This belt is gently handle extrusions at ramp-up and down speeds to accommodate smooth throughput. It includes a scraper with recovering basin. It can be provided with several lengths and they can be changed to 5 different height settings. It is tracked and supplied with four wheels, two of which can turn allowing for easy movement.

Belt Track Wear Strips are used in low-tension spiral systems and increase belt life. It has high-density polyethylene wear strip that is the most non-abrasive, wear resistant and non-metallic.

Bench Vacuum Fillers is a simple versatile filler ideally suited for short runs. It can handle containers of all shapes and diameters up to 3″ D X 7″ H. This filler can accommodate containers made of glass, metal and rigid plastic including those with a sprinkler finish. This design permits easy accessibility to all contact parts for thorough cleaning and changeover. It contains two stainless steel filling nozzles and spouts.

Benchtop Liquid Dispensers provides a combination of fast filling speeds, high accuracy and flexibility ordinarily found only among large, expensive liquid-handling robots. These have full robotic control of the filler head and automatically adjust to the height well pattern of any SBS-standard micro plate. These can be loaded and operated manually, but is also fully compatible with robot loading systems. They also offer graphic image row selection.