Suspension clamps have the axis of oscillation in the plane of the axis of the conductor. These are to be used for both phase conductors and shield wires as well as for straight line and angle supports. These are capable of being fitted with counter weights. It can be able to withstand the mechanical stresses, which can occur during transport, handling, and installation at temperatures as low as -40° C.

Suspension Fluid consists of 2 g/1 polyvinyl alcohol (PVA), 1-5 g/1 each of sodium chloride (nacl) and ammonium thiocyanate in doubly distalled water. The suspension fluid was M/15 phosphate buffer & ph 7.0, temperature 30°C. The suspension fluid consists of 49 percent water, 49 percent alcohol, I percent rust inhibitor and I percent of unpleasant additive.

Suspension Insulator is usually made of porcelain that can be stacked in a string and hangs from a cross arm on a tower or pole and supports the line conductor. Suspension insulators are used for very high voltage systems when it is not practical or safe to use other types of insulators. They have an advantage in that one or more of the insulators in a string can be changed out without replacing the entire string. These insulators are most often specified for EHV, UHV and HVDC transmission lines with both high reliability through accumulated technology and excellent long-term performance.