Gravity Drop Welding Head is the state-of-the-art weld head for large volume production work for typically hard to weld materials and large diameter fasteners. This head is available in both auto-feed and bottom load configurations. This head must be mounted to heavy duty over arm. This is for use with tipped studs.

Gravity Feed Launder System is required for manually transferring molten metals to casting stations. It is used in ceramic plates and fiber insulation and also available with cast refractory lining. It has adjustable supporting legs. It has control thermocouples that are located in every sixteen feet.

Gravity Feed Metal Detector consists of the metal detector electronics, test coil and a high-speed rejection system. The entire assembly is mounted on a rigid platform. The metal detector works on the principle of eddy currents with focused electromagnetic field. The system has an automatic balance, which maintains the performance of the system without the need of periodic adjustment.

Gravity feed spray gun is the most common type used for painting. It is a high-volume, low-pressure gun. It is designed to deposit more of the atomized material onto the surface being sprayed while reducing overspray. This spray gun also uses cup pressure to feed liquid through the spray gun. It mounts the cup on top of the spray gun head so that pull of gravity helps the material flow out of the cup. A gravity feed design helps eliminate the problem of spitting. All of the liquid will flow down into the pickup hole formed in the bottom of the cup. No pickup tube is needed.

The gravity feed system utilizes the force of gravity to transfer the fuel from the tanks to the engine. This system can be used on high-wing airplanes, assuming the fuel tanks are installed in the wings, which places the tanks above the carburetor. The fuel is then gravity fed through the system and into the carburetor.

Gravity Filters consist of an open-topped box, drained at the bottom and partly filled with a filtering medium, usually clean sand. Gravity filters are usually employed for municipal applications and on some industrial applications. Gravity filters are open to the atmosphere at the top and the water percolates through the filter bed by gravity. Gravity filters are free surface filters that are much more commonly used for municipal applications. Gravity filters are usually made of concrete and are operated similarly to sand filters.

Gravity hopper uses a force of gravity to have the paintballs fall into a hole in the hopper. It is used with products that do not require frequent mixing or an auger to assist suction. A gravity hopper relies on gravity to feed the balls into the gun. It consists of a container of the correct shape. It is held at the right angle in which the balls won't drop down the tube if the gun is on its side or upside down.

Gravity HVLP gun is a good solution for spray finishing needs. It is a general purpose gravity feed spray gun for a wide range of industrial materials and coatings applications. The gun is constructed of high grade aluminum. It is generally supplied with two tips, a 1.5mm already fitted to the gun and 1.8mm for heavier materials. It consists of an electro-polished brass air cap.