Grease gun is a common workshop and garage tool, which is used for lubrication. The purpose of the grease gun is to apply lubricant through an aperture to a specific point, usually on a grease nipple. The channels behind the grease nipple lead to where the lubrication is needed. The aperture may be of a type that fits closely with a receiving aperture on any number of mechanical devices. The close fitting of the apertures ensures that lubricant is applied only where needed. There are three types of grease gun. First one is hand-powered, where the grease is forced from the aperture by back-pressure built up by hand cranking the trigger mechanism of the gun, which applies pressure to a spring mechanism behind the lubricant, thus forcing grease through the aperture. The second one is hand-powered, where there is no trigger mechanism, and the grease is forced through the aperture by the back-pressure built up by pushing on the butt of the grease gun, which slides a piston through the body of the tool, pumping grease out of the aperture. And the third one is air-powered (pneumatic), where compressed air is directed to the gun by hoses, the air pressure serving to force the grease through the aperture.

Grease Hose is a high-pressure hose with 1/4″ ID NPT. The pressure rating is 5000 PSI. It avoids the risk of damage or injuries and it should not install with a lower rating. These hoses are made and assembled in high quality fittings.

Grease Injector is available in carbon steel or 304 stainless steel types. Its adjustable output range from .008 cu. in. to .080 cu. in. It also available with manifold inlet bolt and necessary hardware. It is used for lubricating fittings with sealed lubrication. Its fitment comprises an elongate needle having a longitudinal passageway formed.

Grease Seals includes a flexible lip that rubs against a shaft or housing to prevent the leakage or ingress of fluids & dirt. These seals have a spring to help keep the lip in contact with the shaft. They are used to retain or separate lubricants or fluids. These seals are primarily used for rotary applications only. Grease seals are primarily used to retain or separate fluids or lubricants. Grease seals are used in the hubs to retain lubricating grease in the bearing cavity and prevent such grease from escaping the wheel hub & fouling brake components, tires & the track.