3D laser scanner is a device that analyzes a real-world object or environment to collect data on its shape and possibly its appearance. It is used in numerous applications such as industrial, architectural, civil surveying, urban topography, mining, reverse engineering, dentistry, reverse engineering, and mechanical dimensional inspection.

4-gas monitors continuously monitor oxygen, combustible gases, carbon monoxide, and hydrogen sulfide in any combination, activating bright alarm light, 90-dB audible and internal vibrating alarms when gas concentrations exceed the preset limits.

Abbe refractometer is a bench-top refractometer that provides the highest precision of the different types of refractomerters. This is possibly the easiest method to find the refractive index of solid samples, such as glass, plastics, and polymers films. Some Abbe refractometers utilize a digital display for the measurement, to eliminate the need for discerning between small graduations.

AC-operated LVDTs are designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for general industrial use. AC-operated LVDT signal conditioners receive AC current or AC voltage as input signals. They excite a transducer according to defined parameters for voltage and frequency. A variable gain differential amplifier receives the resulting signal, which is then coupled to a synchronous detector, multi-step filter, analog-to-digital converter, and micro-controller. The AC LVDT requires onboard oscillator, carrier amplifier, and demodulator circuitry for externally. The AC LVDT is able to tolerate extreme variations in operating temperature from -40 to + 120 degree C. The AC LVDT advantages include greater accuracy and a smaller body size.

AC/DC Capacitive Proximity Sensors operates with 20...253 VAC or 20...300 VDC. They are available in 034mm smooth barrel, metal, PBT or complete PTFE housings & shielded or non-shielded models. All units are switchable from normally open to normally closed with a simple turn of a screwdriver on the rear of the sensor. It features switching frequency of 25Hz (AC) & 40 Hz (DC), 2 meter cable or quick-disconnect, IP 67 rated, short circuit protected, overload protection and an operating temperature rating from -10 to +70°C (+14 to 158F).

Accelerometer is a device for measuring acceleration. It measures its own motion in contrast to a device based on remote sensing. These are used along with gyroscopes in inertial guidance systems as well as in many other scientific & engineering systems.