Geothermal Heat Pump System uses a condenser circuit that is in either the earth, in the case of a closed-loop system or in a water supply, in the case of an open-loop system, to provide heat to the dwelling or remove heat from the dwelling. They provide domestic hot water. These systems includes three principal components, they are earth connection, heat pump and heat distribution subsystem.

Geothermal power plant technology is used to convert hydrothermal fluids to electricity. There are three geothermal power plant technologies being used to convert hydrothermal fluids to electricity. The conversion technologies are dry steam, flash, and binary cycle. The type of conversion used depends on the state of the fluid (whether steam or water) and its temperature. Dry steam power plants systems are the first type of geothermal power generation plants built. They use the steam from the geothermal reservoir as it comes from wells, and route it directly through turbine/generator units to produce electricity. Flash steam plants are the most common type of geothermal power generation plants in operation today. They use water at temperatures greater than 360°F (182°C) that is pumped under high pressure to the generation equipment at the surface. Binary cycle geothermal power generation plants differ from dry steam and flash steam systems in that the water or steam from the geothermal reservoir never comes in contact with the turbine/generator units.

Giant Hopper Bins are extra large, high density, and heavy duty open hopper stackable bins. It is a perfect solution for storing and organizing large parts. Bins have a stack capacity of up to 100 lbs. and can stack up to 6 bins high. Injection molded from high density polypropylene and polyethylene, bins are waterproof. It can be cleaned easily. Molded in divider slots and optional dividers keep parts separated and organized. Optional clear window increases bin capacity. Permanent label holder allows for easy part identification. Baked-enamel finish is rustproof and durable. It is easily assembled.

Giant tank breathers are over-sized tank breathers. It provides clean and filtered air.  They screw into NPT ports up to 3 inches in size. Air filter elements are rated from 149 microns down to 10 microns. The threaded base is of nylon, which is strong, lightweight, and seals well against metal. The strong, steel cover protects the filter elements.