Food coloring is any substance that is added to food to change its color. It is sometimes used in cooking.

Food grade salt is a crystalline product consisting predominantly of sodium chloride. It is obtained from the sea, from underground rock salt deposits or from natural brine. It is high purity; food grade granulated sodium chloride produced in vacuum pans from chemically purified brine. The crystals are cubic in structure. High purity helps assure consistent saltiness intensity, and there are straight standards on visible, insoluble extraneous material. There are no additives.  

Formic Acid is the simplest carboxylic acid. Its formula is HCOOH or CH2O2. It is an important intermediate in chemical synthesis and occurs naturally, most famously in the venom of bee and ant stings. Formic acid is miscible with water and most polar organic solvents and somewhat soluble in hydrocarbons. Formic acid shares some of the reducing properties of aldehydes. The principal use of formic acid is as a preservative and antibacterial agent in livestock feed.

Fuel Catalyst improves the combustibility of hydrocarbon fuels by treating the fuel immediately before it enters the combustion chamber. This process removes carbon build up and prevents it from re forming. The improved combustion also reduces contamination entering the engine oil and other engine areas, resulting in longer engine life. The catalyst acts on impurity molecules in fuel converting them into extremely active small molecules which have the effect of cracking.

Fuel conditioners are made available to consumer outlets through service stations, discount stores, and automotive supply houses. These conditioners have been advertised to improve the overall performance of internal-combustion engines in a variety of ways with the end result that engine emissions are reduced. It is designed for interposition between an engine's fuel supply line and the engine's fuel combustion zone, which has a cylindrical body portion, with an input end and an output end. It consists of a metallic housing containing a plurality of reactive anti-biological elements and a high Gauss magnet. The fuel passes over the anti-biological elements and adjacent the magnet such that growth of biological agents entrained within the fuels is inhibited.

Fuel oil sludge remover is formulated to eliminate sludge and water. It dissolves the sludge into a combustible substance in such a way as not to clog nozzles, while assuring clean filters and strainers. It also helps to improve atomization and provides an efficient combustion.

Fuel stabilizers are highly concentrated multi-functional stabilizer. It is specially formulated for use in gasoline, diesel and LPG fuels. It contains highly concentrated additives.

Gasoline is a petroleum-derived liquid mixture consisting of hydrocarbons and enhanced with benzene or iso-octane to increase octane ratings, primarily used as fuel in internal combustion engines. Gasoline is produced in oil refineries. The bulk of a typical gasoline consists of hydrocarbons with between 5 and 12 carbon atoms per molecule. These are usec in kitchen ranges and for lighting. Gasoline is a mixture of paraffins (alkanes), naphthenes (cycloalkanes), aromatics and olefins (alkenes). Gasoline also contain some other organic compounds such as organic ethers plus small levels of contaminants in particular sulfur compounds such as disulfides and thiophenes.

Glass cleaners are developed for fast effective cleaning of all glass and mirrored surfaces. It is generally available in liquid version for ease of use. It can also be used on tiled work surfaces. Most glass cleaners are made of ammonia, a strong irritant, and coal tar dyes. Some cleaners contain butyl cellusolve, a neurotoxin, alcohol, naphtha, and glycol ethers.

Graffiti remover is a non-sticky, non-greasy preventative coating to protect all substrates from permanent adhesion of graffiti. This remover penetrates deeply into most substrates and forms a coating, which withstands weather extremely well. It takes off paint, graffiti and grease. This remover is a solvent based formulation with low VOC for more difficult graffiti removal. Combination of lower VOC and stronger cleaning power, it can remove marker, ink, graffiti on walls, stainless steel, partitions, traffic signs, and non-porous surfaces.

Guar gum is primarily the ground endosperm of the seeds from cyamopsis tetragonolobus. The guar seeds are dehusked, milled and screened to obtain the guar gum. It is typically produced as a free flowing, pale off-white colored, coarse to fine ground powder. Guar gum is extracted from the guar bean where it acts as a food and water store. Guar gum is more soluble than locust bean gum and is a better emulsifier as it has more galactose branch points. It is a water soluble fiber that acts as a bulk forming laxative. Guar gum and micellar casein mixtures can be slightly thixotropic if a biphase system forms.

Heat Transfer Fluids are synthetic organic fluids especially designed for their non-corrosiveness when used in metallic heat exchangers. In solar heating systems, heat transfer fluids carry heat from solar heat collectors to the heat storage tanks in solar heating (and cooling) systems. The most common fluids are water, propylene, glycol, ethylene glycol and air. It is divided into two categories, namely single phase and phase-change fluids. It is used in refrigerators, air-conditioners and heat pumps.

High expansion foam is used for controlling a fire that may be escaping sprinkler control. It has the ability to overcome a well-established fire. Like gas extinguishments, to do its job hi-ex foam must fill the entire fire compartment to totally submerge the fire, and continue refilling at a rate adequate to totally replace the foam broken down by the fire. It can be used as a backup for sprinkler failure only if adequate reliability factors are built into design of the system.

High & medium expansion foam concentrate is a non-toxic synthetic foam concentrate made of tensides, stabilizers and anti-freeze. It can be used in all types of high expansion foam generating equipments. It cools, extinguishes and helps to suppress toxic vapours. It is suitable for use with fresh as well as brackish and salt water suitable at 3% proportioning without altering extinguishing/vapour suppression efficiency. It can also be used as medium expansion foam with suitable equipments.

High temperature adhesive depends on the needs of the design engineer at the time. The first structural adhesives used in aircraft were satisfactory for those times, but the need for adhesives to sustain faster aircraft designs. It has generally taken a different direction than for the other types of structural adhesives.