Emulsion corrosion inhibitor provides excellent humidity and salt spray protection. It is applied over black oxide, zinc phosphate, or bare ferrous alloys. The water base emulsion corrosion inhibitor is specially developed to replace conventional oil based corrosion inhibitors. The concentrated barium-free water based emulsion rust inhibitor will protect steel, cast iron and other ferrous parts from in-plant corrosion.

Environmental catalyst is a substance that initiates a chemical reaction and enables it to proceed under different conditions (as at a lower temperature or faster rate) than otherwise possible. The catalyst itself is not consumed, but continues to perform its function in subsequent reactions. This catalyst is used to initiate the breakdown of pollutants into their harmless elements, as when catalytic converters turn hydrocarbons, carbon monoxide and nitrogen oxides coming from cars into carbon dioxide, nitrogen and water vapor.

Epoxy is a thermosetting epoxide polymer. It also called polyepoxide. It cures when mixed with a catalyzing agent or hardener. Most common epoxy resins are produced from a reaction between epichlorohydrin and bisphenol-A.

Epoxy adhesives are suitable for high-strength bonding of a variety of materials and have excellent resistance to harsh environments, chemicals, and water. It is used to produce satisfactory joints between nylon and metal, wood glass and leather. It is applied with a wooden paddle or spatula. They will cure at room temperature in 24 to 48 hours.

An ethylene oxide catalyst consists of silver deposited on an alumina carrier. It has been treated to with an aqueous basic salt solution, the pH of the aqueous treating solution is maintained above 8 during the treatment. An ethylene oxide catalyst is provided which is essentially transition metal and rhenium free and which consists essentially of silver, alkali metal, sulfur and boron components on a support such as alumina, optionally with fluorine or chlorine component.

A fabric softener is used to prevent static cling and makes the fabric softer. It is also called as fabric conditioner. The use of fabric softener may however reduce the water absorption capabilities of the fabric, and is contra-indicated in some articles like microfibre textiles. For best results, un-diluted fabric softener should not be poured directly onto clothes. Another form of fabric softener is in the form of dryer sheets, which are added to clothing in the tumble dryer to soften the fabrics and prevent static. Dryer sheets, or dryer anticling strips, can also be used to keep clothes smelling good while being stored.which are added to clothing in the tumble dryer to soften the fabrics and prevent static. Dryer sheets, or dryer anticling strips, can also be used to keep clothes smelling good while being stored.

A FEP polyimide film is made of polyimide film coated by F46 on one side or both sides with thickness ranges from 0.0375mm-0.12mm. It is used in electromagnetic wire, high temperature-resisting wire for electrical insulation and other fields that require PI self-sticking through heating.

Fire fighting foam is used to control and extinguish large fires by smothering, suppressing vapours and cooling. It is widely used to extinguish liquid pool fires.

Flake salt is named for its large flat particles. It is a good pinching salt, added to food at the last moment to enhance flavor and add crisp texture. Surface evaporation is used to produce natural flake salt but it can also be manufactured by mechanically rolling granular salt. Flake salt's large delicate crystals stick readily to surfaces such as baked goods and chocolate and dissolve quickly in solution.

Flexible Ceramics are easy to use to 1650°C, highly efficient insulation products. They are available as fiber blankets, ceramic Papers, moldable Sheets, tapes, ropes and fabrics. They have low heat storage capacity, high resiliency, high purity, and high mechanical and thermal shock resistance.

A flexible insulating laminate is a heat insulating flameproof, soft, resilient and compressible polyester blanket, which is bonded directly at one surface to a polymer surface of a vapor barrier formed by metallized moisture impermeable, polymer film. The bond is formed by fusion of a heat-softened surface of the polymer film and a heat softened surface of the blanket. There is a stiff, high tensile strength bonding layer formed between the blanket and the barrier. The preferred blanket is composed of heat fused polyester fibers.